Search results for " CALIBRATION"
showing 10 items of 148 documents
Mass calibration of the energy axis in ToF- E elastic recoil detection analysis
2016
We report on procedures that we have developed to mass-calibrate the energy axis of ToF-E histograms in elastic recoil detection analysis. The obtained calibration parameters allow one to transform the ToF-E histogram into a calibrated ToF-M histogram.
Radiometric calibration of SeaWIFS in the near infrared
2005
The radiometric calibration of the Sea-Viewing Wide-Field-of-View Sensor (SeaWiFS) in the near infrared (band 8, centered on 865 nm) is evaluated by use of ground-based radiometer measurements of solar extinction and sky radiance in the Sun's principal plane at two sites, one located 13 km off Venice, Italy, and the other on the west coast of Lanai Island, Hawaii. The aerosol optical thickness determined from solar extinction is used in an iterative scheme to retrieve the pseudo aerosol phase function, i.e., the product of single-scattering albedo and phase function, in which sky radiance is corrected for multiple scattering effects. No assumption about the aerosol model is required. The ae…
Inflight Radiometric Calibration of New Horizons' Multispectral Visible Imaging Camera (MVIC)
2017
© 2016 Elsevier Inc. We discuss two semi-independent calibration techniques used to determine the inflight radiometric calibration for the New Horizons’ Multi-spectral Visible Imaging Camera (MVIC). The first calibration technique compares the measured number of counts (DN) observed from a number of well calibrated stars to those predicted using the component-level calibration. The ratio of these values provides a multiplicative factor that allows a conversation between the preflight calibration to the more accurate inflight one, for each detector. The second calibration technique is a channel-wise relative radiometric calibration for MVIC's blue, near-infrared and methane color channels us…
Combined Electrical Resistivity Tomography (ERT), Direct-Push Electrical Conductivity (DP-EC) Logging and Coring - A New Methodological Approach in G…
2016
Non-invasive geophysical methods have been increasingly applied in geoarchaeological research commonly showing the need of data calibration based on stratigraphical information deduced from outcrops or sediment cores. In this contribution, a methodological approach combining two-dimensional (2D) electrical resistivity tomography (ERT) and stratigraphical data based on coring and, for the first time in geoarchaeological research, direct-push electrical conductivity (DP-EC) logging is presented and discussed. The approach yields high resolution data based on studies of two different types of archives, the Holsterburg site in central Germany located in a fluvio-terrestrial zone and the Corfu C…
Calibration of mobile manipulators using 2D positional features.
2018
International audience; Robotic manipulators are increasingly being attached to Automatic Ground Vehicles (AGVs) to aid in the efficiency of assembly for manufacturing systems. However, calibrating these mobile manipulators is difficult as the offset between the robotic manipulator and the AGV is often unknown. This paper provides a novel, simple, and low-cost method for calibrating and measuring the performance of mobile manipulators by using data collected from a laser retroreflector that digitally detects the horizontal two-dimensional (2D) position of reflectors on an artifact as well as a navigation system that provides the heading angle and 2D position of the AGV. The method is mathem…
Assessing the accuracy of industrial robots through metrology for the enhancement of automated non-destructive testing
2016
This work presents the study of the accuracy of an industrial robot KR5 arc HW, used to perform quality inspections of components with complex shapes. Metrology techniques such as laser tracking and large volume photogrammetry were deployed to quantify both pose and dynamic path accuracies of the robot in accordance with ISO 9283:1998. The overall positioning pose inaccuracy of the robot is found to be almost 1 mm and path inaccuracy at 100% of the robot rated velocity is 4.5 mm. The maximum pose orientation inaccuracy is found to be 14 degrees and the maximum path orientation inaccuracy is 5 degrees. Despite of the significant maximum inaccuracies, uncertainty of a robotic scanning applica…
Carbon isotope stratigraphy, magnetostratigraphy, and 40Ar/39Ar age of the Cretaceous South Atlantic coast, Namibe Basin, Angola
2014
This publication results from Projecto PaleoAngola, an international cooperative research effort among the contributing authors and their institutions, funded by the National Geographic Society, the Petroleum Research Fund of the American Chemical Society, Sonangol E.P., Esso Angola, Fundacao Vida of Angola, LS Films, Maersk, Damco, Safmarine, ISEM at SMU, The Royal Dutch Embassy in Luanda, TAP Airlines, Royal Dutch Airlines, The Saurus Institute, and the Perot Museum of Nature and Science. JS was additionally funded by Yale University and the Alfred Kordelin Foundation. We dedicate this contribution to the late Kalunga Lima, our friend and colleague in Projecto PaleoAngola. We thank Margar…
Vision metrology and Structure from Motion for archaeological heritage 3D reconstruction: A Case Study of various Roman mosaics
2017
<p class="Abstract">Vision metrology and computer vision can be successfully used for archaeological heritage 3D reconstruction in very high precision 3D measurement projects. Of those archaeological objects requiring very accurate measurements (&lt;1 mm), ancient mosaics comprise some of the most important. The aim of this paper is to assess the photogrammetric/computer vision approach in a vision metrology context as part of a 3D mosaics survey. In order to evaluate the optimal photogrammetric/computer vision workflow in this work, three different surveys were performed on three mosaics of different sizes and locations. Two of these are stored at the <em>Antonino Salinas&l…
Historical biogeography of Melastomataceae: the roles of Tertiary migration and long-distance dispersal
2001
Melastomataceae and Memecylaceae are pantropically distributed sister groups for which an ndhF gene phylogeny for 91 species in 59 genera is here linked with Eurasian and North American fossils in a molecular clock approach to biogeographical reconstruction. Nine species from the eight next-closest families are used to root phylogenetic trees obtained under maximum likelihood criteria. Melastomataceae comprise â¼3000 species in the neotropics, â¼1000 in tropical Asia, 240 in Africa, and 225 in Madagascar in 150-166 genera, and the taxa sampled come from throughout this geographic range. Based on fossils, ranges of closest relatives, tree topology, and calibrated molecular divergences, Mel…
Calibration of the photon spectrometer PHOS of the ALICE experiment
2019
Journal of Instrumentation 14(05), P05025 - P05025 (2019). doi:10.1088/1748-0221/14/05/P05025